Friday, October 18, 2019

Legacy Carriers Airlines and Future Challenges Research Paper

Legacy Carriers Airlines and Future Challenges - Research Paper Example The operating expenses have been increasing significantly in the period of analysis for the legacy carriers while the revenue generating capacities have not been sufficient to cope up with them. .Most legacy carriers face significant losses in 2008 while the low cost carriers operate profitably except those in Asia. Passenger preferences also favour the low cost carriers. The study recommends the need for a relook on the business and marketing strategies of the free service airlines to compete with the low cost carriers. However the success of low cost carriers cannot be considered to be everlasting and cannot be considered as the success of a business model. The legacy carriers still form an integral part of the aviation industry. With the wave of liberalization and deregulation in the 1980s, airline industry has also undergone deregulation. Since the 1970s, there was tight regulation and rising hyper competition. The two main features of the regulated era were tacit collusion and avoiding head on competition (D’Aveni, 1995; Jarach, 2004).With the wave of deregulation, low cost carriers emerged as the new category attracting huge customers creating big challenge to the traditional full service legacy carriers. Traditional carries have found out difficult to compete with these low cost carriers in the deregulated era. It was argued that the tight regulatory practices in the airline industry might have led to many economic inefficiencies. This in turn had resulted in achieving low cost air transportation to public which was one of the core objectives of air transport policies. Hence deregulation wave started in the industry to improve efficiency and reduce airfares through rise in competition, air networks rationalization and airline governance enhancement (Gonenc and Nicoletti, 2001). Â  

Thursday, October 17, 2019

Research proposal Example | Topics and Well Written Essays - 1750 words

Research Proposal Example Gulf areas in general, and Saudi Arabia in particular, are oil rich regions with the economy being driven by the large oil producing organizations. The required financial support for the SMEs, in order to strengthen their capability to further contribute towards the progress of Saudi Arabia’s economy, is however somewhat lacking. This is despite the fact that SMEs have evidently exhibited great developmental potential. The current research aims to determine the role that SMEs play in the development of Saudi Arabia; as well as to identify any governmental and other business organizations’ support provided towards sustaining continued operations and growth of SMEs in the region. This paper be presented with a brief overview of studies and researches previously conducted on the subject through a literature review of SMEs, in general; the financial support of the government for SMEs in Saudi Arabia; and the role that SMEs play towards the development of the country. The ne xt section would focus on the research questions and methodology, which would identify the required method which would achieve responding to the main concerns identified within the discourse. Likewise, any limitation to the study would be presented; prior to delving into the ethical considerations, as required. Finally, the time scales which detail the tasks and time frames for the specific research portions would be detailed in the last section. 2.0 Literature Review There have been several studies conducted on the subject that aimed to determine the role of SMEs, in general; and SMEs within the Saudi Arabia region. Their definitions would be explored, including financial support and development role in the economy of Saudi Arabia. 2.1 Small and Medium Enterprises Though SMEs exist all over the world and in large numbers, there is still no concrete definition for SMEs due to various practical reasons. Fu (2011) suggested that defining SMEs differs from country to country and are ba sed upon different variables such as number of employees, revenue, nature of trade etc. (Fu, 2011). Normally, the number of employees for SMEs are defined at less than or equal to fifty for relatively small organizations whereas for medium organizations, the upper limit of number of employees is normally between 100 to 250 (Capitas, 2013). Thus, SMEs were clearly classified according to the number of employees, as well as the amount of sales revenues generated within a stipulated time frame. Within Saudi Arabia, various organizations define SMEs according to different criteria and are followed by different organizations. There are two important criteria used in defining SMEs within Saudi Arabia. One criteria followed by the SME Development Center is to have less than or equal to 20 employees for small organizations and 21-100 employees for medium organizations. However, Shalaby (2004) concentrated on suggesting that different criterion is being followed by Saudi Industrial Developme nt Fun, and it defines SMEs based upon the revenue criteria

Critique of Quantitative Research Essay Example | Topics and Well Written Essays - 1000 words

Critique of Quantitative Research - Essay Example However, the authors of this article have not given a statistic of what others have done on the same study. It is however important to note that the investigators have provided sense in their research since the organization of the research study is such that there is a research question, followed by how the study was conducted and the results. The investigators have also reinforced sense in their study by using scientific method relate variables to the outcome. The investigators in this research article have clearly stated that there are problem of fall prevention among elderly adults in nursing home settings. However, the investigators have not given a comprehensive statistics to validate the existence of the problem. For instance, when the investigators states that 1.6 million residents fall each year, it is important to state how many of these are elderly (Gray-Miceli et al, 2010). It is also important to note that the authors have not clearly stated the limitations of the current fall prevention strategies for elderly residents. Researchers would have given statistics to show insufficiency of the current based practices, for example statistics showing increasing falls in order to reinforce problem statement and clearly show that current best practices for fall prevention are not effective. Research questions for this have not been clearly stated by the investigators. Research question is important since it outlines what the researcher wants to find answers to. The investigators have merely stated the purpose and outlined the problem but have not clearly stated research question. However, the researchers have listed a number of variables but have failed to relate the variables to research question. Nevertheless, the study in this article is very important since it provides a turning point nursing practice especially in caring for the elderly adults. This is because the findings in this study are important in improving evidence

Wednesday, October 16, 2019

Research proposal Example | Topics and Well Written Essays - 1750 words

Research Proposal Example Gulf areas in general, and Saudi Arabia in particular, are oil rich regions with the economy being driven by the large oil producing organizations. The required financial support for the SMEs, in order to strengthen their capability to further contribute towards the progress of Saudi Arabia’s economy, is however somewhat lacking. This is despite the fact that SMEs have evidently exhibited great developmental potential. The current research aims to determine the role that SMEs play in the development of Saudi Arabia; as well as to identify any governmental and other business organizations’ support provided towards sustaining continued operations and growth of SMEs in the region. This paper be presented with a brief overview of studies and researches previously conducted on the subject through a literature review of SMEs, in general; the financial support of the government for SMEs in Saudi Arabia; and the role that SMEs play towards the development of the country. The ne xt section would focus on the research questions and methodology, which would identify the required method which would achieve responding to the main concerns identified within the discourse. Likewise, any limitation to the study would be presented; prior to delving into the ethical considerations, as required. Finally, the time scales which detail the tasks and time frames for the specific research portions would be detailed in the last section. 2.0 Literature Review There have been several studies conducted on the subject that aimed to determine the role of SMEs, in general; and SMEs within the Saudi Arabia region. Their definitions would be explored, including financial support and development role in the economy of Saudi Arabia. 2.1 Small and Medium Enterprises Though SMEs exist all over the world and in large numbers, there is still no concrete definition for SMEs due to various practical reasons. Fu (2011) suggested that defining SMEs differs from country to country and are ba sed upon different variables such as number of employees, revenue, nature of trade etc. (Fu, 2011). Normally, the number of employees for SMEs are defined at less than or equal to fifty for relatively small organizations whereas for medium organizations, the upper limit of number of employees is normally between 100 to 250 (Capitas, 2013). Thus, SMEs were clearly classified according to the number of employees, as well as the amount of sales revenues generated within a stipulated time frame. Within Saudi Arabia, various organizations define SMEs according to different criteria and are followed by different organizations. There are two important criteria used in defining SMEs within Saudi Arabia. One criteria followed by the SME Development Center is to have less than or equal to 20 employees for small organizations and 21-100 employees for medium organizations. However, Shalaby (2004) concentrated on suggesting that different criterion is being followed by Saudi Industrial Developme nt Fun, and it defines SMEs based upon the revenue criteria

Tuesday, October 15, 2019

A Journal opinion article Essay Example | Topics and Well Written Essays - 500 words

A Journal opinion article - Essay Example e report is erroneous although there is no reason to harp on this issue since the myth about the flourishing economic situation of America has disappeared since the days of the sub prime crisis. The other question that requires analysis is whether the foundation of this data is indisputable or not. This is because the way in which such data is calculated in the countries of European Union is different. The countries of the western European region have been moving through shaky financial situation for a long time when other problems such as unemployment are added to it. According to an estimate, the poverty situation in the US would have been higher if the method of calculation would have been on the lines of the European nations. However, that would not change the problem of poverty of a country that has always remained the hub of financial excesses. The economists have expressed extreme annoyance on this report that has been released by the President. The statistics of poverty situation might not be promising in the US particularly from the time of recession that gripped the nation with its ugly claws and gradually captured the entire world. However, as the economists have expressed that the data that has been taken into account for calculation is not correct as it has left out some of the most important aspects such as tax credits. When compared with the developing nations such as India or a part of South Eastern Asia, the poverty in the US might not be as bleak as it has been presented in the report. Poverty is necessarily a curse of every economy although it goes alongside irrespective of the situation. As a matter of fact, it is difficult to predict the way in which financiers would react to this report; overall the situation would not have much promises for them although the people who are thought to be under the grip of poverty or classified as belonging to the category below the line of poverty. In short, investments in the real estate or stock trading

Fast Food Essay Example for Free

Fast Food Essay The fast food industry has been growing more and more every year. There is a fast food restaurant in every corner. Since fast food is becoming so popular more and more people chose to go to a fast food restaurant daily. Fast food is a continuing growth industry in our country. Fast food restaurants continue to increase their popularity by lowering their prices and providing faster service for their customers. There is a huge competition between fast food restaurants and how they advertise can effect the business. There are many reasons as to why fast food has become so popular. One of the main causes is the simplest of them all, laziness. One of the main causes for the popularity of fast food is advertisement. There are fast food restaurants being advertised of billboards, at some schools, on the internet, and on television. Most fast food advertisements are directed to young people because they are easily persuaded. According to Haugen, young people in America are bombarded with advertising every day. A young person does not usually think of their health or other important factors that could become of eating fast food constantly, they just think that it’s what they want because they saw it on the television. Haugen states, â€Å"Marketers reach them through commercials on television and also through ads in magazines, on billboards, on the internet and even in the bathroom stalls at school† (Haugen 2008). It seems that there is no escape from fast food marketing for children. It is everywhere they turn. It is sad that advertisement companies have found so many ways to get to children to make them want to consume their product because for most of them it results in obesity. One of the most successful advertisement products comes with the kid’s meal, the toy. Many children insist on their parents buying them that meal, from that particular fast food restaurant, because they want the toy that comes with the kid’s meal. Since fast food has become so popular it has resulted in obesity for many children. The children are drawn to the fast food because of the toys that come with the meal and how it is advertised to be more appealing to children. Since the effect of fast food on children has been so drastic many fast food restaurants now have healthy choice kid meals that come with a toy as well. This could be a great alternative to help children eat healthy. Since many people have such demanding schedules they resort to fast food. According to Simplicity of Thinking, the main cause for the current expanding of fast food restaurants is that they fit with the needed speed of living everywhere (SOT 2011). This means that with an individuals busy schedule they do not have enough time to prepare a meal in the morning so they resort to fast food. An example given states that throughout the day an individual may sometimes resort to fast food more than once in order to make their life easier. Fast food makes it possible to eat on the go and live life uninterrupted. According to Think Free, since the popularity of fast food has grown people have become addicted to fast food. Eating fast food develops the habit and addiction to this kind of food (Rokotmivo 2009). the secret recipes of fast food restaurants have hidden components, regardless if they are healthy of not, they are always included in the meal. This is what makes each fast food restaurant distinct from another and makes you want to return to that same one to get that same taste that you have become addicted to. For example, getting a cheeseburger from Burger King will taste different than ordering a cheeseburger from Carls Jr. even if it is ordered with the exact same condiments. This is because of the secret ingredient that each burger has that sets it apart from other fast food restaurants. When people are addicted to fast food they will find natural and typical food less delicious and no longer satisfies their needs. Having fast food be an easy resort to cooking a meal and taking someones time away from them it has caused it to become more popular and has still effected many people in having a poor diet. Fast food is not just convenient it is also inexpensive. According to Food for Thought, a new national study of eating out and income shows that fast food dining has become more popular with lower income families (FFT 2002). Fast food has become more popular with those of lower income families. With the specials and the great deals like the dollar menu it is less expensive than preparing a meal for some families. This results in more people going to fast food restaurants. If some fruit at a grocery store costs a dollar or sometimes maybe more, people would rather go to a fast food restaurant and get something more filling like a cheeseburger off of the dollar menu. With the economy so bad it is easy to see why many people resort to fast food over going to the grocery store. It is not only easier but in some cases it is less expensive. One of the main causes for the popularity of fast food is that people are simply lazy. It is true that many people havve the time and the means to cook a decent meal for themselves or their family but they resort to fast food simply because it is an easy alternative. Why is there a need to cook when it would be faster to just go to a fast food restaurant since there is one at almost every corner and order something. The lazy factor of many people has resulted in obesity. Fast food also makes a persons body want to be less inactive. After eating something from McDonald’s an individual would most likely want to take a nap or just relax and watch a movie. The effect that fast food has on the body is never good, whether its laziness or obesity. In conclusion, the cause of the popularity of fast food is great advertisement, its easy and fast, and people are lazy. The effects of fast food has resulted in it being everywhere, whether its advertised on television, on billboards, or in schools, and found on every corner. Fast food has led to many people being obese and addicted to the unhealthy choices they offer. The more popular fast food has gotten the more fast food restaurants are being built to reach the demands of society. Fast food for some people can rule their lives.

Sunday, October 13, 2019

Cone Beam Computed Tomography (CBCT) to Assess Bone Density

Cone Beam Computed Tomography (CBCT) to Assess Bone Density INTRODUCTION Implantology has witnessed an explosive growth during the last few years, from a technique practiced on the fringe of acceptability to one embraced by the mainstream dentistry and dental implants have emerged as a widely accepted form of teeth replacement. Implants are bio-acceptable materials with an inherent capacity to osseointegrate into the jaw bone to support a dental prosthesis to restore adequate function and esthetics without affecting adjacent hard and soft tissue structures. The Success of any implant procedure depends on a series of patient related and procedure dependent parameters, which include general health conditions, biocompatibility of the implant material, feature of the implant surface, surgical procedure and the quality and quantity of the local bone1. Careful recording and analysis of clinical and radiological information, interdisciplinary communication and detailed planning play an important role in determining the final successful outcome. Bone density is a key factor to take into account when predicting implant stability2 Clinical studies show greater implant survival in the mandible than in the upper maxilla, due to the bone characteristics. This survival is influenced by bone quality i.e. bone density2 .The bone density is an important determining factor in implant treatment and can be assessed fairly using different imaging techniques3. The quality of bone in the proposed implant site in terms of relative proportion and density of cortical and medullary bone has frequently been assessed by using a grading scheme proposed by Lekholm and Zarb, which is applicable only to cross sectional images. This classification system has been utilized worldwide because it is easy to use without considerable investment. Misch (2008) used computed tomography (CT) to objectively classify bone density into 5 types based on Hounsfield units (HU). This method allows for a precise and objective assessment of bone quality2 Several imaging techniques are currently available for presurgical and postsurgical examination, including devices developed specifically for dental implant imaging. Computerized tomograms are one of the best available radiographs for determining the bone quality. With the advancement of radiographic technology, computed tomography (CT), as well as cone- beam computed tomography (CBCT) are increasingly being considered essential for optimal implant placement , especially in the case of complex reconstructions4 Unlike conventional two-dimensional  radiographs, techniques like CBCT offer 3-D views of the mouth, face, and jaw from any direction. The cone beam configuration is ideal for the maxillofacial region because the dimensions of the beam allow for a panoramic view, sparing patients the radiation exposure of separate scans of the maxilla and mandible5.The overall advantages of CBCT are in its high resolution, potentially lower radiation dose and reduced cost compared with standa rd Computerized Tomography2 The past two decades have seen continual efforts by manufacturers, researchers and clinicians to improve the success of implant treatment outcomes through evolution in implant designs, materials and clinical procedures6. One such aspect is co-relation of available bone density with primary implant stability. Primary implant stability denotes the stability of a dental implant immediately after placement. Implant stability can be evaluated objectively, noninvasively, and easily by the insertion torque test.7 The insertion torque measurement technique, which records the torque after the implant has been placed, provides information on the local bone quality8. A High initial stability may be an indication for immediate loading with prosthetic reconstruction. A low primary stability following implantation, can cause the implants mobility leading to failure. Bone density and implant stability are important factors for implant osseointegration, and has been widely demonstrated by several au thors3. The insertion torque measurement technique, which records the torque during implant placement, provides information on the local bone quality.1 A number of studies have shown the relationship between bone density based on CT and primary implant stability 9,10. However, there are few studies about the relationship between bone density estimated by CBCT and primary implant stability. The possibility of predicting the primary implant stability and bone quality during the pre-surgical assessment of the implant placement site may produce an implant treatment protocol with higher predictability. The bone density and Implant stability can be evaluated using CBCT and the insertion torque test which records the torque during implant placement and provides information of the local bone quality6, 8. Keeping in mind the aforesaid goals the present study was designed to compare and evaluate the relationship between the bone density estimated by CBCT and the primary implant stability of t he dental implants by measurements of the insertion torque and to determine their correlation. MATERIALS AND METHODS Twenty out- patients with missing single/ multiple teeth who visited the Department of Oral Maxillofacial Surgery, Dayananda Sagar College of Dental Sciences, Bangalore and who were suitable for implant rehabilitation were considered and taken up for the study. Patients with uncontrolled systemic/ psychiatric illness, previous history of undergoing radiotherapy or chemotherapy, pregnant patients, cases of post implant removal and implants placed in sinus lift and immediate extraction sites were excluded from the study. pre-operative assessment: Patients selected based upon the above criteria underwent a thorough clinical examination, and the details were recorded using custom-made case proforma. A written informed consent was obtained from all patients and a standardized pre-surgical and surgical protocol was followed for all the patients. Pre-operative bone density of implant sites were evaluated using cone beam computerized tomographic scans. Bone density measurements were derived using 3DiagnoSys version 4.1 Software (3DIEMME Bio imaging Technologies). 3Diagnosys ® is a diagnostic imaging, analyses and 3D simulation software, tailored for the Clinician. 3Diagnosys ® software helps to interact with the 3D-model of the Patient, which is obtained by importing TC/CBCT/RM images in DICOM format, in a simple and intuitive way. The tools included in this software are not bound to morphological reconstructions but are also able to extract from the DICOM data the densitometric values for a bone funct ional evaluation.)Pre-operative evaluation of bone height and bone width was done using Cone Beam Computed Tomographic scan and appropriate implants were selected to be placed. The bone height and width measurements were achieved using the â€Å"Carestream Dental Imaging Software v6.13.3.3 CS imaging software†(Fov-15x9cm)† .All CBCT scans were obtained using the â€Å"KODAK 9500machine† (10ma 90 Kvp, 200 micron resolution, 10.9sec exposure, 605mgy per cm2). STATISTICAL ANALYSIS The statistical analyses were performed using SPSS version 16.0 software (SPSS Inc., Tokyo,Japan). Spearman’s correlation coefficient (rs) was calculated to evaluate the correlation among density values and insertion torques. A value of P RESULTS The density value ranged from 209.91 to 667.13Hu. The mean density value and insertion torque of all implants were 464.69 + 135.74 Hu and 49.0 + 8.20 respectively. There was highly significant correlation between bone density and insertion torque (rs 0.89, P DISCUSSION Over the last decade, there has been significant changes in reconstruction with dental implants. Rather than merely focusing on the tooth or teeth to be replaced, today’s implant practitioner considers a broad and complex set of interwoven factors before formulating an implant treatment plan4. Proper treatment planning comprises of pre – operative depiction and quantification of accurate bone height and contour which can be established by radiographic examination.11 The success of dental implants relies heavily on both the quality and the quantity of available bone for implant placement3. Studies have shown higher failure rates for implants placed in bone of poor quality and quantity.3 Bone density is a key factor to take into account when predicting implant stability2 Clinical studies show greater implant survival in the mandible than in the upper maxilla, due to the bone characteristics. This survival is influenced by bone quality i.e. bone density2 The bone density is an important determining factor in implant treatment and can be assessed fairly using different imaging techniques5. The quality of bone in the proposed implant site in terms of relative proportion and density of cortical and medullary bone has frequently been assessed by using a grading scheme proposed by Lekholm and Zarb, which is applicable only to cross sectional images. This classification system has been utilized worldwide because it is easy to use without considerable investment. Misch (2008) used computed tomography (CT) to objectively classify bone density into 5 types based on Hounsfield units (HU). This method allows for a precise and objective assessment of bone quality3 Several imaging techniques are currently available for presurgical and postsurgical examination, including devices developed specifically for dental implant imaging.12 They are used to visualize the internal anatomy of the jaws in 3-dimensional perspectives, including the proximity of  nasal fossae, neurovascular bundles, pneumatization of the maxillae, soft tissue morphology and bone quality. Computerized tomograms are one of the best available radiographs for determining the bone quality. Periapical and panoramic radiographs are the least viable options as the subtle changes between the different bone types can’t be quantified using them, also the lateral cortical plates tend to obscure the trabecular density . With the advancement of radiographic technology, computed tomography (CT), as well as cone- beam computed tomography (CBCT) are increasingly being considered essential for optimal implant placement , especially in the case of complex reconstructions 13. Unlike conve ntional two-dimensional radiographs, techniques like CBCT offer 3-D views of the mouth, face, and jaw from any direction.1 The cone beam configuration is ideal for the maxillofacial region because the dimensions of the beam allow for a panoramic view, sparing patients the radiation exposure of separate scans of the maxilla and mandible14. The overall advantages of CBCT are in its high resolution, potentially lower radiation dose and reduced cost compared with standard Computerized Tomography15 The past two decades have seen continual efforts by manufacturers, researchers and clinicians to improve the success of implant treatment outcomes through evolution in implant designs, materials and clinical procedures2. One such aspect is co-relation of available bone density with primary implant stability. Primary implant stability refers to the stability of a dental implant immediately after implantation. Implant stability can be evaluated objectively, noninvasively, and easily by the insertion torque test.16 The insertion torque measurement technique, which records the torque after the implant has been placed, provides information on the local bone quality. High initial stabilization may be an indication for immediate loading with prosthetic reconstruction. If primary stability is not high enough following implantation, the implants mobility is high and can cause failure. A number of devices and techniques have been developed to assess implant stability, including cutting torque resistance analysis, the reverse torque test, the insertion torque test, the mobility measurement test, and resonance frequency (RF) analysis2. Implant stability can be evaluated objectively, noninvasively, and easily by the insertion torque test and RF analysis.17 The insertion torque measurement technique, which records the torque during implant placement, provides information on the local bone quality1. A number of studies have shown the relationship between bone density based on CT and primary implant stability .9,10However, there are few studies about the relationship between bone density estimated by CBCT and primary implant stability.In a study conducted by Isoda k et al; The bone quality evaluated by specific CBCT showed a high correlation with the primary stability of the implants.8 CBCT is one of the significant imaging modalities that can be used to assess the relat ionship between primary implant stability and bone density which can further give an insight into the prognosis of the implant treatment. Implant stability can be evaluated objectively, non-invasively and easily by using the insertion torque test which records the torque during implant placement and provides information of the local bone quality 1. Keeping in mind the aforesaid goals the present study was designed to compare and evaluate the relationship between the bone density estimated by CBCT and the primary implant stability of the dental implants by measurements of the insertion torque. It also aims to determine the correlation between bone density and primary stability of implant by insertion torque value. In all cases Implants were placed under local anesthesia. Different implant systems were used and all were root form implants. Surgical preparation and isolation of surgical field was accomplished according to standard operative protocols. A Crestal incision was placed and Mucoperiosteal flap was reflected and alveolar bone was exposed, and the implant placement site was identified by the marking made with the aid of the surgical probe. Osteotomy site preparation was done with a Reduction gear hand piece (1:16/64) with an external Irrigation attached to the handpiece. Implant osteotomy was performed using standard sequential drill bits as per the dimensions of the implant. The osteotomy was proceeded till the desired depth as per the selected implants. The Implant was driven into the osteotomy site using the manual torque wrench till the final depth was reached. All Implants placed were of tapered design and their lengths ranging from 8 to 16 mm and diameters from 3-5 mm. After placi ng the implant, the implant stability was measured manually using the insertion torque test by a torque wrench with calibrations .The insertion torque reading was measured and recorded at the maximum torque resistance achieved. The cover screw over the implant was then placed and Flap closure was done. Post-operative OPG and IOPA was taken. Routine Antibiotics and anti-inflammatory drugs were prescribed along with oral hygiene maintenance instructions. Patients were recalled for regular follow ups. Permanent prosthesis was given after 3 months. SUMMARY CONCLUSION The study assessed the bone quality with density values obtained by cone beam computed tomography (CBCT) pre-operatively and determined their correlation with the insertion torque values recorded during the Implant placement procedure.From the observations and results obtained ,We can conclude that, the present study demonstrates the relationship between the bone density values derived from Cone Beam computerized tomography (Hu), located in the maxilla and mandible , and bone quality according to the Lekholm Zarb classification. The primary implant stability measured with the insertion torque test (ITV) depends on bone density values, bone quality and implant location. Implants Placed in location with higher bone density have more stability, and we can probably predict the implant insertion torque based on the bone density values (Hu) and the implant location. Finally, with higher bone density values (Hu) and higher primary implant stability measured in ITV values; Hounsfield units can be used as a diagnostic parameter to predict possible implant stability. The results of our study indicate that CBCT can be used to assess the bone quality. Also attaining a good insertion torque and thereby enhancing the implant stability aids successful osseointegration and prosthetic rehabilitation. Hence CBCT can be used as a predictor diagnostic tool for implant success. We suggest that a larger number of patients with a larger follow up might help a conclusive determining factor that pre-operative CBCT is a predictor for primary implant stability.